Excavator Hire Perth: 1.8t to 13.8t Diggers
We hire Komatsu excavators across the full size range: the 1.8t PC18 for tight residential access, the 5.5t PC55 for house pads and service trenches, and the 13.8t PC138US-11 for full site cuts and large-scale earthworks. One call and we work out which machine fits your job.
All excavators are available on wet hire (machine plus our Komatsu-trained operator) or dry hire (machine delivered to you). Wet hire is the smart choice for most Perth residential and builder jobs - the operator manages the machine, the bucket selection and the work, while you manage the project.
Our operators are Komatsu-trained fitters. That means if a machine plays up mid-job, it gets sorted on site without waiting on a mechanic. No downtime, no costly delays.
Komatsu PC18 (1.8t), PC55 (5.5t) and PC138 (13.8t) - wet or dry hire
Tight-tail-swing PC138US-11 for boundary work on constrained sites
Komatsu-trained operators fix their own gear - zero third-party delays
300mm, 900mm and 1200mm GP buckets - right size for the trench or pad
Our Komatsu Excavator Fleet
1.8t
Komatsu PC18
Tight access, backyards, narrow passages
5.5t
Komatsu PC55
House pads, pool digs, service trenches
13.8t
Komatsu PC138US-11
Full site cuts, bulk earthmoving, deep excavation
3
Bucket Sizes
300mm, 900mm and 1200mm GP buckets in fleet
| Model | Operating Weight | Max Dig Depth | Transport Width | Key Feature |
|---|---|---|---|---|
| Komatsu PC18 | 1.8t | ~2.5m | ~990mm | Fits through standard residential side gate |
| Komatsu PC55 | 5.5t | ~4.2m | ~1,900mm | Best all-rounder for Perth residential and light commercial |
| Komatsu PC138US-11 | 13.8t | ~6.5m | ~2,400mm | Tight-tail-swing for boundary work, high bucket breakout force |
Komatsu excavator fleet - specification comparison for Perth jobs
Figures are approximate. Contact us with your specific access dimensions and required dig depth if you are unsure which machine suits the job.
Choosing the Right Excavator Size for Your Job
When to Choose the Komatsu PC18 (1.8t)
- Side gate access only - the PC18 fits through a standard 900mm gate
- Soakwell installations in tight backyards
- Shallow service trenches and small pool surrounds
- Jobs where a larger machine would cause surface damage getting to the work area
When to Choose the Komatsu PC55 (5.5t)
- House pads and slab preparation on standard residential blocks
- Pool excavations - the PC55 moves volume efficiently
- Service trenches over 20m long or deeper than 1.5m
- Jobs where the PC18 would take three days and the PC55 would take one
When to Choose the Komatsu PC138US-11 (13.8t)
- Full site cuts for new builds on raw blocks
- Large earthmoving volumes where the PC55 would run all week
- Deep excavations beyond 4m
- Tight-tail-swing requirement for boundary work on constrained sites
Not Sure Which Machine?
Call us and describe the job - access width, what you need to move, how deep, and the soil type. We will tell you which machine gets the job done in the fewest days. Getting the size right saves you money.
Excavator Hire Rates in Perth
| Machine | Wet Hire (from) | Dry Hire (from) |
|---|---|---|
| Komatsu PC18 (1.8t) | From $1,500/day | From $500/day |
| Komatsu PC55 (5.5t) | From $1,700/day | From $650/day |
| Komatsu PC138 (13.8t) | From $2,000/day | From $950/day |
Rates are indicative. Transport is charged separately based on distance. Rock breaker attachment hire is an additional charge when required. Multi-day and weekly hires receive better rates.
What Drives the Total Cost
The machine day rate is only part of the cost. Transport, job duration and ground conditions are the main variables. A 1.8t doing a two-day job in limestone can cost more than a 5.5t doing the same job in one day in sandy ground. We explain this when we quote.
Why We Run Komatsu and Maintain Them Ourselves
Included In The Rate
- Machines are on a Komatsu-scheduled maintenance programme - services done by the operator who runs the machine
- Hydraulic lines, bucket pins, track tension and greasing are checked before every job
- On-site fault response means a small issue stays a small issue instead of becoming a day off
- Direct line to us throughout every job - the owner answers and manages the outcome
What Is Not Included
“We service our own machines. If something plays up on site, it gets sorted then and there - no waiting, no phone tag with a mechanic.”
Plant Hire Perth
Bucket Sizes and Attachments Available
| Machine | Buckets Available | Rock Breaker | Best Trench Width |
|---|---|---|---|
| Komatsu PC18 | 300mm, 450mm | Yes | 300-450mm trenches |
| Komatsu PC55 | 300mm, 600mm, 900mm | Yes | 300-900mm trenches |
| Komatsu PC138 | 900mm, 1200mm | Call to confirm | Bulk earthmoving and wide excavation |
We match the bucket to the job before the machine leaves the yard. Tell us the trench width or the type of excavation and we arrive with the right setup.
Related Hire & Services
Wet Hire Perth: Machine + Operator
Wet hire in Perth - machine plus trained operator on site. Komatsu excavators, bobcats and tippers available. Call us direct for a fast quote.
Wet Hire Perth
Mini Excavator Hire Perth: 1.8t Tight Access
Mini excavator hire Perth - Komatsu PC18 1.8t for tight backyards and side access. Rock breaker available. Wet or dry hire, call us now.
Mini Excavator Hire Perth
Excavation & Earthworks Perth: Site Cuts & Pads
Excavation and earthworks across Perth - site cuts, house pads and bulk earthmoving. Komatsu excavators with trained operators. Get a fast quote.
Excavation & Earthworks PerthExcavator Hire Perth Questions
Excavator hire in Perth starts from around $500 per day for dry hire of the Komatsu PC18 1.8t, or from $1,500 per day for wet hire (machine plus operator). Larger machines cost more. Call us for a quote based on your job, location and hire duration.
Wet hire means the machine comes with our operator. Dry hire means you hire the machine only and supply your own competent operator. Wet hire suits most residential and builder customers. Dry hire suits earthmoving contractors with operators on payroll.
Yes. The Komatsu PC18 and PC55 both have hydraulic rock breaker attachments available. You need to request this when you book so we bring it out on the trailer with the machine.
Minimum hire is one day. We hire weekly and monthly too. For longer hires, call us to discuss rates - extended hire often gets a better day rate than multiple single-day bookings.
Yes. We deliver and collect across the Perth metro area using our plant trailers. Transport is charged based on distance from our Perth metro yard. Call us with your site address for a transport cost estimate.
Need Excavator Hire In Perth?
We prefer calls, get straight through to the team. Reliable machines. Experienced operators. Jobs done right.