Excavation & Rock Breaking in Armadale
Plant Hire Perth covers Armadale and the southeast corridor for excavation, soakwells, trenching, rock breaking and bobcat hire. Armadale is one of Perth's established growth corridors, with a mix of older residential blocks and new estate development pushing south towards Byford.
- Armadale
- Kelmscott
- Seville Grove
- Harrisdale
- Piara Waters
- Brookdale
1.8t Komatsu mini through to a 13.8t excavator
24/7 - we answer after hours and on weekends
Wet or dry hire - operator or bare machine
Owner-run and Komatsu-trained on every job
Excavation & Bobcat Services in Armadale
Ground conditions in Armadale vary more than coastal-plain suburbs. You will find a mix of clay, sandy loam and limestone, depending on the specific location and whether you are in an older part of the suburb or a newer estate.
We also cover Kelmscott, Roleystone and the Byford corridor from the same Armadale run. Call us to talk through your job.
Wet Hire
Machine plus an experienced operator, we run the gear for you.
Wet Hire
Dry Hire
Machine only, delivered to site, for licensed operators.
Dry Hire
Excavation & Earthworks
Site cuts, pads, levelling and bulk earthworks.
Excavation & Earthworks
Trenching & Drainage
Service trenches, drainage and utility runs.
Trenching & Drainage
Soakwells
Supply and install, sized to your block and council rules.
Soakwells
Rock Breaking
Hydraulic hammer for limestone, rock and hard digs.
Rock Breaking
The Armadale Jobs We Take On
Armadale has a good range of residential job types - from standard soakwells on new blocks to deeper excavations where older properties are being renovated or extended. The PC55 5.5t handles most Armadale residential work comfortably.
- Excavation and site cuts for new builds and renovations
- Soakwell installation to City of Armadale requirements
- Trenching for drainage, water and electrical services
- Rock breaking and limestone removal
- Pool excavation and pool pad preparation
- Bobcat levelling for driveways, landscaping and retaining
- Soil and spoil removal by tipper truck
Rock Breaking Available in Armadale
Limestone and clay combinations in parts of Armadale mean rock breaking is a regular service we provide in this area. If you have hit rock or expect to, we can bring the breaker attachment on the PC18 or set up the PC138 for heavier breaking. No need to hire separately.
Ground Conditions in Armadale and Surrounds
Armadale sits further from the coastal sand than suburbs like Wanneroo and Baldivis. The soil profile runs heavier - clay and sandy loam are common in residential areas, with limestone and ironstone appearing on some blocks and in Roleystone further east.
| Location | Typical Ground | What It Means for Your Job |
|---|---|---|
| New Armadale estates | Sandy loam on engineered fill | Generally straightforward digging |
| Older Armadale residential | Clay and compacted subsoil | Heavier spoil, allow more time |
| Kelmscott | Clay and loam | Similar to older Armadale blocks |
| Roleystone | Ironstone and hard clay | Rock breaker often needed below 500mm |
| Southern Armadale / Byford edge | Variable - clay to limestone | Call us with site details |
Why Our Setup Matters on Armadale Jobs
Variable ground in Armadale is where operator experience and in-house servicing actually matter. A trained operator reading the ground adjusts technique as the dig progresses - that is very different from putting a machine on site and hoping it goes according to plan.
Our fleet is serviced by Komatsu-trained fitters - the same people who operate the machines. If a hydraulic line works loose or the breaker needs attention mid-job, it gets sorted on site. That is the difference between a half-day hold-up and finishing the job on time.
“Variable ground is where the difference between a good hire company and an average one actually shows up. You want an operator who adjusts to what the ground is doing, not someone who just keeps pushing.”
Plant Hire Perth
Plant Hire Across Perth's South & Southeast
Up the hill in Roleystone or out towards Byford, we cover it. Here are the other suburbs with their own plant hire page.
Indicative Pricing for Plant Hire in Armadale
Armadale runs about 35-45 minutes from our Malaga yard, out through the south-east. The foothills ground can turn from sand to clay to rock across a single block, so we match the machine and the breaker to the site before we commit to a price.
| Machine | Typical Use | Indicative Rate |
|---|---|---|
| PC18 1.8t mini (wet hire) | Pool dig, soakwells, side access | From ~$1,200/day |
| PC55 5.5t mid (wet hire) | Site cuts, trenching, retaining | From ~$1,500/day |
| PC138 13.8t (wet hire) | Full site cuts, bulk earthworks | From ~$1,800-2,000/day |
| Bobcat T450/T590 (wet hire) | Levelling, clean-up, driveways | From ~$900/day |
| 8t tipper truck | Spoil cartage, soil delivery | From ~$120-150/load |
These Are Guides, Not Quotes
Armadale and the Kelmscott-Roleystone side can hide rock under the topsoil, so we price the right machine up front rather than surprise you mid-dig. Call with the block details for a firm number.
Armadale Jobs: Common Questions
Yes. We service Armadale and the southeast corridor including Kelmscott, Roleystone and the Byford edge. Call us for availability and a quote.
Yes. Rock breaking is a regular service in Armadale, particularly in Roleystone and older parts of the suburb where ironstone and limestone appear. We bring the breaker attachment rather than a separate machine where possible.
Armadale is approximately 35km southeast of Perth. Transport to Armadale sits mid-range in our metro pricing. Wet hire rates start from around $1,200/day for the mini. Call for a firm quote.
Yes. We supply and install soakwells to City of Armadale requirements. Ground conditions vary in Armadale, so call us with your block details and we can size the system correctly.
Yes. Kelmscott and Roleystone are on the same southeast run as Armadale. Roleystone in particular can have harder ground conditions, so mention what you know about the soil when you call.
Why Armadale Jobs Suit Our Setup
Komatsu-trained operators who fix their own gear. We own the machines and the operators know them inside out, so a breakdown on your block never turns into a lost day.
- Operators are trained fitters, on-site breakdowns sorted then and there
- Komatsu-maintained fleet kept job-ready, not run into the ground
- No third-party mechanic call-outs, no half-day stoppages mid-dig
- Direct line to the crew, the owner answers and runs the job
24/7, calls after hours Komatsu-trained. We service our own machines.
Get A Fast Quote
Tell us the job and we will get straight back to you.
Quote My Armadale Earthworks
We prefer calls, get straight through to the team. Reliable machines. Experienced operators. Jobs done right.