
Scissor Lift And Boom Lift Hire Perth
We hire elevated work platforms from 6.3 metres to 9.8 metres working height. Scissor lifts for straight-up work over a floor, boom lifts for anything you have to reach out and over.
Cherry picker, knuckle boom, EWP, man lift: they are all names people use for the same family of machines. Tell us what you need to reach rather than what the machine is called and we will get the right one there.
Every unit is delivered, and every unit goes out on the understanding that whoever operates it is trained and, where the machine requires it, licensed.
Scissor lifts and boom lifts, 6.3m to 9.8m working height
Straight-up reach or out-and-over reach, matched to the obstacle
Indoor slab machines and rough terrain machines both available
Delivered across the Perth metro and collected when you are done
Working Height Is Not Platform Height
Hire listings quote working height, which is the platform height plus about two metres for a person standing on it. So a machine advertised at 9.8 metres working height puts the platform floor a bit under 8 metres up.
Measure to what your hands need to reach, not to the ceiling, then check the machine against that. Booking on the ceiling height is how people end up half a metre short on the last row of cladding.
| The Term | What It Means | What To Do With It |
|---|---|---|
| Working height | Platform height plus roughly 2m of standing reach | Compare it to where your hands go, not to the ceiling |
| Platform height | How high the floor of the basket sits | The honest number for anything you have to lean over |
| Outreach | How far a boom can extend sideways from its base | The whole reason to pick a boom over a scissor lift |
| Platform capacity | Total weight of people plus tools plus material | Two people and a load of fixings adds up faster than expected |
| Stowed width | How wide the machine is folded down | Decides whether it fits the door, gate or lift |
Not Sure Which Machine The Job Needs? Ask Us.
Call Us NowWhat Is In The Way Decides The Machine
The choice is not about height. It is about whether there is anything between you and the work.
Scissor Lift
- Goes straight up over its own footprint, no sideways reach
- Big platform, room for two people and material
- Needs firm level ground directly under the work
- Useless if a garden bed, a machine or a wall is in the way
- The pick for ceilings, lighting, cladding and long straight runs
Boom Lift Or Cherry Picker
- Reaches up and out and over an obstacle
- Smaller basket, usually one or two people and hand tools
- Parks clear of the work and comes to it
- Slower to reposition precisely on a long straight run
- The pick for trees, signage, facades and anything over an obstruction
Straight Up, Or Up And Over
Can you park the machine directly underneath the work with nothing in the way? If yes, a scissor lift is faster and carries more. If anything at all sits between the machine and the job, you want a boom.
Training, Tickets And Harnesses
In Western Australia a boom-type elevating work platform with a boom length of 11 metres or more needs a high risk work licence, issued through WorkSafe WA. Below that, and for scissor lifts, there is no high risk work licence but the operator still has to be trained and competent in the specific machine.
Most Perth sites will also ask for a Yellow Card or equivalent familiarisation, and most principal contractors want to see it before the machine is switched on.
A Boom Basket Means A Harness
Anyone in a boom lift basket wears a harness with a lanyard attached to the anchor point in the basket, not to the structure being worked on. Scissor lifts have guardrails instead and normally do not require one. Confirm your own site rule, because plenty of sites mandate a harness in both.
If your crew is not ticketed or familiarised for the machine you need, tell us at the booking rather than on the day.
The Ground Under An Access Machine
An elevated platform concentrates a lot of weight into small wheels, and the higher it goes the less forgiving it gets about the surface underneath.
Check Before The Machine Arrives
- Whether the working area is a slab, compacted hardstand or loose ground
- Any service pit, drain cover or soft trench backfill on the travel route
- The gradient, because most indoor machines have a very small slope tolerance
- Overhead power lines and the exclusion distance that applies to them
- Doorway and lift dimensions if the machine has to go inside or upstairs
Rough Terrain Is A Different Machine
If the work happens off the slab, ask for a rough terrain unit rather than trying to make an indoor machine cope. They have bigger wheels, more clearance and outriggers, and they are the difference between a productive day and a machine sitting still.
Related Hire & Services
Telehandler Hire Perth
Telehandler hire Perth, 2.6t to 5t telescopic handlers that reach up and over. Forks, bucket or jib. Delivered to site, call us for a rate.
Telehandler Hire PerthForklift Hire Perth
Forklift hire Perth, 2.5t to 5t counterbalance machines for yards, warehouses and building sites. Delivered to site. Call us for a rate.
Forklift Hire PerthDry Hire Perth
Dry hire in Perth - take the machine and run it yourself. Komatsu excavators and Bobcats delivered ready to work. Sharp day rates, call now.
Dry Hire PerthScissor Lift And Boom Lift Hire Questions
A scissor lift travels straight up over its own footprint and carries a large platform, so it suits ceilings and long straight runs with clear ground underneath. A cherry picker, which is a boom lift, reaches up and out and over obstacles from a machine parked clear of the work.
That figure is working height, which includes about two metres of standing reach for a person on the platform. The platform floor itself sits a bit under 8 metres. Measure to where your hands need to be rather than to the ceiling, then compare.
Scissor lifts do not require a high risk work licence in Western Australia, but the operator must be trained and competent in that machine, and most sites will want a Yellow Card or equivalent familiarisation. A boom-type platform with a boom of 11 metres or more does require a high risk work licence through WorkSafe WA.
Only if it is a rough terrain unit. Standard indoor machines have small wheels, low clearance and a very small slope tolerance, and they sink or refuse to elevate on soft ground. Tell us the surface and we will send a machine built for it.
That depends on stowed width and stowed height, not on the working height. Send us the narrowest opening on the route in and the door height, and we will confirm which units clear it before anything is loaded on the truck.

Need Scissor Lift And Boom Lift Hire In Perth?
We prefer calls, get straight through to the team. Reliable machines. Experienced operators. Jobs done right.

